Upload files to "4 VCSA/(2) VCSA"

4 VCSA/(2) VCSA/Distributed Switch Configuration.md

@@ -0,0 +1,122 @@
+
+Switch Setup:
+1. ![[SelectGlobe.png]]
+	- From the home page of VCSA in the menu on the left side, Select the globe.
+2. ![[NewDistributedSwitch.png]]
+	- Right click "DCO Datastore"
+	- Hover over "Distributed Switch"
+	- Click "New Distributed Switch..."
+3. ![[SOPs/ESXi and VCSA/VCSA/VCSA Configuration Photos/NameAndLocation.png]]
+	- Name: Infrastructure Distributed Switch 
+	- Click: Next
+4. ![[SelectVersion.png]]
+	- Select Version "7.0.3 - ESXi 7.0.3 and later"
+	- Click Next
+5. ![[ConfigureSettings.png]]
+	- Number of uplinks: 4
+	- Network I/O Control: Enabled
+	- Default port group: Not Selected
+	- Click Next
+6. Check configuration
+	- Click Finish
+7. Complete steps 1 through 2 again.
+8. ![[ToolsNameAndLocation.png]]
+	- Name: Tools Distributed Switch
+	- Click Next
+9. ![[SelectVersion 1.png]]
+	-  Select Version "7.0.3 - ESXi 7.0.3 and later"
+	- Click Next
+10. ![[ConfigureSettings 1.png]]
+	- Number of uplinks: 4
+	- Network I/O Control: Enabled
+	- Default port group: Not Selected
+	- Click Next
+11. Check configuration
+	- Click Next
+Port Group Setup:
+1. ![[NewDistributedPortGroup.png]]
+	- From the menu on the left right click "Infrastructure Distributed Switch"
+	- Hover over "Distributed Port Group"
+	- Select "New Distributed Port Group..."
+2. This step will be completed for each VLAN you have except "Tools"
+	1. Domain ID: 3
+	2. VCSA Management ID: 5
+	3. ESXi Management ID: 10
+	4. ESXi vMotion ID: 11
+	5. ESXi Provisioning ID: 12
+	6. Tool Web Interface ID: 25
+	7. Workstations ID: 30
+	8. Test ID: 40
+	9. Trunk ID: 666
+	- ![[PortGroupNameAndLocation.png]]
+		- Name: <\VLAN Name\>
+		- Click Next
+	- ![[PortGroupConfigureSettings.png]]
+		- Port Binding: Static binding
+		- Port allocation: Elastic
+		- Number of ports: 8
+		- Network resource pool: (default)
+		- VLAN type: VLAN
+		- VLAN ID: 3
+	- Confirm Configuration
+		- Click Finish
+3. Follow step 1 but on the "Tools Distributed Switch"
+4. Name and Location:
+	- Name: Tools
+	- Click Next
+5. Configure settings: 
+	- Port Binding: Static Binding
+	- Port allocation: Elastic
+	- Number of ports: 8
+	- Network resource pool: (default)
+	- VLAN type: None
+	- VLAN ID: 20
+6. Confirm configuration 
+	- Click Finish
+Adding Host:
+1. ![[AddAndManageHosts.png]]
+	- In the menu on the left, right click "Infrastructure Distributed Switch"
+	- Click " Add and Manage Hosts..."
+2. ![[Addhosts.png]]
+	- Select "Add hosts"
+	- Click Next
+3. ![[Selecthosts.png]]
+	- Select ESXi host
+	- Click Next
+4. ![[ManagePhysicalAdapters.png]]
+	- vmnic1: Uplink1
+5. Click Next
+6. Click Next
+7. Confirm Configuration
+	- Click Finish
+Removing Temporary Port Groups:
+
+1. ![[SelectHostTab.png]]
+	- Click Host in the top right menu
+2. ![[EditSettings.png]]
+	- Right Click "DC"
+	- Click "Edit Settings"
+3. ![[ClickDomain.png]]
+	- Click "Domain"
+	- Click "Browse ..."
+4. ![[SelectDistributedDomain.png]]
+	- Click "Domain" with "Infrastructure Distributed Switch"
+	- Click "OK"
+5. Click "OK"
+6. Complete Step 2 for "VCSA"
+7. ![[SelectVCSAManagement.png]]
+	- Click "VCSA Management"
+	- Click "Browse"
+8. ![[SelectDistributedVCSAMan.png]]
+	- Click "VCSA Management" with "Infrastructure Distributed Switch"
+9. Click "OK"
+Deleting Temporary Port Groups:
+1. Return to ESXi (10.2.10.30)
+2. ![[SelectNetworking.png]]
+	- In the menu on the left click "Networking"
+3. ![[SelectPortGroupsToDelete.png]]
+	- Right Click The standard port groups:
+		- Domain
+		- VCSA Management
+		- VM Network
+	- Click "Remove"