122 lines
3.3 KiB
Markdown
122 lines
3.3 KiB
Markdown
|
|
Switch Setup:
|
|
1. ![[SelectGlobe.png]]
|
|
- From the home page of VCSA in the menu on the left side, Select the globe.
|
|
2. ![[NewDistributedSwitch.png]]
|
|
- Right click "DCO Datastore"
|
|
- Hover over "Distributed Switch"
|
|
- Click "New Distributed Switch..."
|
|
3. ![[SOPs/ESXi and VCSA/VCSA/VCSA Configuration Photos/NameAndLocation.png]]
|
|
- Name: Infrastructure Distributed Switch
|
|
- Click: Next
|
|
4. ![[SelectVersion.png]]
|
|
- Select Version "7.0.3 - ESXi 7.0.3 and later"
|
|
- Click Next
|
|
5. ![[ConfigureSettings.png]]
|
|
- Number of uplinks: 4
|
|
- Network I/O Control: Enabled
|
|
- Default port group: Not Selected
|
|
- Click Next
|
|
6. Check configuration
|
|
- Click Finish
|
|
7. Complete steps 1 through 2 again.
|
|
8. ![[ToolsNameAndLocation.png]]
|
|
- Name: Tools Distributed Switch
|
|
- Click Next
|
|
9. ![[SelectVersion 1.png]]
|
|
- Select Version "7.0.3 - ESXi 7.0.3 and later"
|
|
- Click Next
|
|
10. ![[ConfigureSettings 1.png]]
|
|
- Number of uplinks: 4
|
|
- Network I/O Control: Enabled
|
|
- Default port group: Not Selected
|
|
- Click Next
|
|
11. Check configuration
|
|
- Click Next
|
|
Port Group Setup:
|
|
1. ![[NewDistributedPortGroup.png]]
|
|
- From the menu on the left right click "Infrastructure Distributed Switch"
|
|
- Hover over "Distributed Port Group"
|
|
- Select "New Distributed Port Group..."
|
|
2. This step will be completed for each VLAN you have except "Tools"
|
|
1. Domain ID: 3
|
|
2. VCSA Management ID: 5
|
|
3. ESXi Management ID: 10
|
|
4. ESXi vMotion ID: 11
|
|
5. ESXi Provisioning ID: 12
|
|
6. Tool Web Interface ID: 25
|
|
7. Workstations ID: 30
|
|
8. Test ID: 40
|
|
9. Trunk ID: 666
|
|
- ![[PortGroupNameAndLocation.png]]
|
|
- Name: <\VLAN Name\>
|
|
- Click Next
|
|
- ![[PortGroupConfigureSettings.png]]
|
|
- Port Binding: Static binding
|
|
- Port allocation: Elastic
|
|
- Number of ports: 8
|
|
- Network resource pool: (default)
|
|
- VLAN type: VLAN
|
|
- VLAN ID: 3
|
|
- Confirm Configuration
|
|
- Click Finish
|
|
3. Follow step 1 but on the "Tools Distributed Switch"
|
|
4. Name and Location:
|
|
- Name: Tools
|
|
- Click Next
|
|
5. Configure settings:
|
|
- Port Binding: Static Binding
|
|
- Port allocation: Elastic
|
|
- Number of ports: 8
|
|
- Network resource pool: (default)
|
|
- VLAN type: None
|
|
- VLAN ID: 20
|
|
6. Confirm configuration
|
|
- Click Finish
|
|
Adding Host:
|
|
1. ![[AddAndManageHosts.png]]
|
|
- In the menu on the left, right click "Infrastructure Distributed Switch"
|
|
- Click " Add and Manage Hosts..."
|
|
2. ![[Addhosts.png]]
|
|
- Select "Add hosts"
|
|
- Click Next
|
|
3. ![[Selecthosts.png]]
|
|
- Select ESXi host
|
|
- Click Next
|
|
4. ![[ManagePhysicalAdapters.png]]
|
|
- vmnic1: Uplink1
|
|
5. Click Next
|
|
6. Click Next
|
|
7. Confirm Configuration
|
|
- Click Finish
|
|
Removing Temporary Port Groups:
|
|
|
|
1. ![[SelectHostTab.png]]
|
|
- Click Host in the top right menu
|
|
2. ![[EditSettings.png]]
|
|
- Right Click "DC"
|
|
- Click "Edit Settings"
|
|
3. ![[ClickDomain.png]]
|
|
- Click "Domain"
|
|
- Click "Browse ..."
|
|
4. ![[SelectDistributedDomain.png]]
|
|
- Click "Domain" with "Infrastructure Distributed Switch"
|
|
- Click "OK"
|
|
5. Click "OK"
|
|
6. Complete Step 2 for "VCSA"
|
|
7. ![[SelectVCSAManagement.png]]
|
|
- Click "VCSA Management"
|
|
- Click "Browse"
|
|
8. ![[SelectDistributedVCSAMan.png]]
|
|
- Click "VCSA Management" with "Infrastructure Distributed Switch"
|
|
9. Click "OK"
|
|
Deleting Temporary Port Groups:
|
|
1. Return to ESXi (10.2.10.30)
|
|
2. ![[SelectNetworking.png]]
|
|
- In the menu on the left click "Networking"
|
|
3. ![[SelectPortGroupsToDelete.png]]
|
|
- Right Click The standard port groups:
|
|
- Domain
|
|
- VCSA Management
|
|
- VM Network
|
|
- Click "Remove" |