Switch Setup:
1. ![[SelectGlobe.png]]
	- From the home page of VCSA in the menu on the left side, Select the globe.
2. ![[NewDistributedSwitch.png]]
	- Right click "DCO Datastore"
	- Hover over "Distributed Switch"
	- Click "New Distributed Switch..."
3. ![[SOPs/ESXi and VCSA/VCSA/VCSA Configuration Photos/NameAndLocation.png]]
	- Name: Infrastructure Distributed Switch 
	- Click: Next
4. ![[SelectVersion.png]]
	- Select Version "7.0.3 - ESXi 7.0.3 and later"
	- Click Next
5. ![[ConfigureSettings.png]]
	- Number of uplinks: 4
	- Network I/O Control: Enabled
	- Default port group: Not Selected
	- Click Next
6. Check configuration
	- Click Finish
7. Complete steps 1 through 2 again.
8. ![[ToolsNameAndLocation.png]]
	- Name: Tools Distributed Switch
	- Click Next
9. ![[SelectVersion 1.png]]
	-  Select Version "7.0.3 - ESXi 7.0.3 and later"
	- Click Next
10. ![[ConfigureSettings 1.png]]
	- Number of uplinks: 4
	- Network I/O Control: Enabled
	- Default port group: Not Selected
	- Click Next
11. Check configuration
	- Click Next
Port Group Setup:
1. ![[NewDistributedPortGroup.png]]
	- From the menu on the left right click "Infrastructure Distributed Switch"
	- Hover over "Distributed Port Group"
	- Select "New Distributed Port Group..."
2. This step will be completed for each VLAN you have except "Tools"
	1. Domain ID: 3
	2. VCSA Management ID: 5
	3. ESXi Management ID: 10
	4. ESXi vMotion ID: 11
	5. ESXi Provisioning ID: 12
	6. Tool Web Interface ID: 25
	7. Workstations ID: 30
	8. Test ID: 40
	9. Trunk ID: 666
	- ![[PortGroupNameAndLocation.png]]
		- Name: <\VLAN Name\>
		- Click Next
	- ![[PortGroupConfigureSettings.png]]
		- Port Binding: Static binding
		- Port allocation: Elastic
		- Number of ports: 8
		- Network resource pool: (default)
		- VLAN type: VLAN
		- VLAN ID: 3
	- Confirm Configuration
		- Click Finish
3. Follow step 1 but on the "Tools Distributed Switch"
4. Name and Location:
	- Name: Tools
	- Click Next
5. Configure settings: 
	- Port Binding: Static Binding
	- Port allocation: Elastic
	- Number of ports: 8
	- Network resource pool: (default)
	- VLAN type: None
	- VLAN ID: 20
6. Confirm configuration 
	- Click Finish
Adding Host:
1. ![[AddAndManageHosts.png]]
	- In the menu on the left, right click "Infrastructure Distributed Switch"
	- Click " Add and Manage Hosts..."
2. ![[Addhosts.png]]
	- Select "Add hosts"
	- Click Next
3. ![[Selecthosts.png]]
	- Select ESXi host
	- Click Next
4. ![[ManagePhysicalAdapters.png]]
	- vmnic1: Uplink1
5. Click Next
6. Click Next
7. Confirm Configuration
	- Click Finish
Removing Temporary Port Groups:

1. ![[SelectHostTab.png]]
	- Click Host in the top right menu
2. ![[EditSettings.png]]
	- Right Click "DC"
	- Click "Edit Settings"
3. ![[ClickDomain.png]]
	- Click "Domain"
	- Click "Browse ..."
4. ![[SelectDistributedDomain.png]]
	- Click "Domain" with "Infrastructure Distributed Switch"
	- Click "OK"
5. Click "OK"
6. Complete Step 2 for "VCSA"
7. ![[SelectVCSAManagement.png]]
	- Click "VCSA Management"
	- Click "Browse"
8. ![[SelectDistributedVCSAMan.png]]
	- Click "VCSA Management" with "Infrastructure Distributed Switch"
9. Click "OK"
Deleting Temporary Port Groups:
1. Return to ESXi (10.2.10.30)
2. ![[SelectNetworking.png]]
	- In the menu on the left click "Networking"
3. ![[SelectPortGroupsToDelete.png]]
	- Right Click The standard port groups:
		- Domain
		- VCSA Management
		- VM Network
	- Click "Remove"