diff --git a/8 Tools/OpenVAS/OpenVAS S.O.P..pdf b/8 Tools/OpenVAS/OpenVAS S.O.P..pdf
new file mode 100644
index 0000000..1d1b9e2
Binary files /dev/null and b/8 Tools/OpenVAS/OpenVAS S.O.P..pdf differ
diff --git a/8 Tools/OpenVAS/OpenVas SOP.md b/8 Tools/OpenVAS/OpenVas SOP.md
new file mode 100644
index 0000000..d3c108e
--- /dev/null
+++ b/8 Tools/OpenVAS/OpenVas SOP.md	
@@ -0,0 +1,141 @@
+### ~ Cpl Potter, Nicholas
+
+### This is the SOP for setting up OpenVas
+
+## Installing OpenVas via Terminal
+
+1. Install VMware Kali Linux from [Kali's Website](https://www.kali.org/get-kali/#kali-virtual-machines "https://www.kali.org/get-kali/#kali-virtual-machines")
+2. Run commands to make sure your Kali instance is up to date before installing OpenVas (You will need an internet connection to run these properly)
+ ```bash
+    sudo apt update
+ ```
+
+```bash
+    sudo apt upgrade -y
+``` 
+        - The -y will push a Yes to any user input prompts
+
+```bash
+	sudo apt dist-upgrade -y
+```
+
+```bash
+     sudo apt install openvas
+    ``` 
+
+### OpenVas is now installed now we have to setup the web interface
+
+```bash
+     sudo gvm-check-setup
+    ```
+
+    (This will verify the installation) 
+![alt text](check-setup.png)
+ ```bash
+    sudo gvm-setup 
+    ```
+
+    - If gvm-setup does not work you will need to upgrade postgresql
+ ```bash
+    sudo pg_lsclusters 
+```
+
+(If you have 2 versions shown follow the rest) ![alt text](lsclusters.png)
+```bash
+    sudo pg_dropcluster 'enter the newest version number' main --stop
+```
+
+```bash
+    sudo pg_upgradecluster 'enter the older versions number' main
+```
+
+```bash
+    sudo pg_dropcluster 'enter the old version number' main
+```
+
+```bash
+    sudo apt purge postgresql-client-15
+```
+
+- now try running sudo gvm-setup
+
+## Starting and stopping OpenVas
+
+```bash
+     sudo gvm-start 
+```
+    (Starts the web interface)
+2. open browser and navigate to [Web Interface](https://127.0.0.1:9392/ "https://127.0.0.1:9392") 127.0.0.1:9392
+    - Will bring you to a greenbone login screen
+```bash
+     sudo gvm-stop
+```
+    (Stops the web interface)
+
+## Creating Users
+
+1. In your terminal
+```bash
+    sudo runuser -u _gvm -- gvmd --create-user=username --new-password=password
+```
+
+- This command will generate a hash value for the password which will be used to login to the web interface ![alt text](NewUser.png)
+
+## Changing Password to Standard
+
+1. Navigate to [Web Interface](https://127.0.0.1:9392/ "https://127.0.0.1:9392")
+2. Login with your created username and the hashed password generated from the terminal
+    - DO NOT LOSE THE HASHED PASSWORD
+3. Click on the person in the top right corner and click my settings ![alt text](person.png)
+4. On the My Settings page click the Pen and Paper in the top left above the Gear ![alt text](PenAndPaper.png)
+5. Enter the Hashed Password in the Old text box and your Standard Password in the New and Confirm boxes ![alt text](PasswordBox.png)
+6. Click save and log back in using new password
+
+# Making Web Interface Accessible from Internal Network
+
+1. Stop the web service
+ 
+    ```bash
+    sudo gvm-stop
+    ```
+  
+2. Make sure your workstation IP is the IP you want your web interface to have. ![alt text](openvasip.png)
+    
+3. Use your preferred text editor in terminal and navigate to /usr/lib/systemd/system/greenbone-security-assistance.service ![alt text](vim.png)
+    
+4. Once in the text editor, go down to the ExecStart line and change the IP from loopback (127.0.0.1) to 0.0.0.0. Leave the port alone. ![alt text](IPchange.png)
+
+5. Exit and save changes to that file then reload the daemon
+
+    ```bash
+    sudo systemctl daemon-reload
+    ```
+ 
+6. Start the web interface and if your workstation is in the Networks IP range you can access the Web Interface IP.
+
+    ```bash
+    sudo gvm-start
+    ```
+
+# Creating Targets
+
+1. Access the webserver for [Openvas](https://127.0.0.1:9392/ "https://127.0.0.1:9392") ![alt text](Dashboard.png)
+
+2. Hover over the Configuration tab and click on Targets ![alt text](Targets.png)
+
+3. Once on the Targets page select the Paper with the star on it in the top left to create a new target ![alt text](newtarget.png)
+
+4. A screen will pop up. Give it a descriptive name for the target range, add comments if necessary, put the network range in **x.x.x.x/xx** format and select the Port Range to scan from then click save.
+    _Port ranges will be made later_
+
+    ![alt text](targetinfo.png)
+
+
+# Creating Port Lists
+
+1. Follow Step 1-3 from creating a target **(Selecting Port Lists instead of Targets on Step 2)**
+
+2. Put a descriptive name and a comment if needed. Then fill in your port range **(This field will give you an example of how to define your port ranges T:xx-xx,xx,U:xx-xx,xx)** Then click save
+
+
+![alt text](newportlist.png)
\ No newline at end of file